Product Advantages
Since its establishment in 2003, Beijing Ruizhi Tianhong Science and Technology Co., Ltd.'s numerical control products can be summarized as "one high, two good, three easy":
High Cost Performance
Good Stability
Good Flexibility
Easy to Operate
Easy to Install
Easy to Maintain
Contact Us
Address: 5F, Building 4, No.4 Yard, Life Science Park, Beiqing Road, Changping District, 102206 Beijing, China
Tel: 86010-53275118 (General Line)
Tel: 86010-53275110 (Reception)
The three-axis three-linkage tangential following control system is mainly applied in including cutting, trimming, spraying, etc.
The three-axis and three-linkage manual teaching and grinding control system supports sensor-assisted teaching and uses a 12.1-inch color large screen.
The disc tool change motion control system, it can use point-counting tool magazine, position tool magazine and adapt to cylinder tool magazines and fixed tool magazines.
The planar straight-line ATC system, and it can achieve tool changer at the back and side of the machine, as well as double side row, cylinder rear row.
The mechanical dotting motion control system,enabling offline dotting and measurement of the workpiece surface and can precisely compensate for the processing depth.
The five-axis three-linkage motion control system supports double X and double Z motion modes. By reading the T command, the control axes can be switched.
The four-axis three-linkage motion control system can achieve four-axis three-linkage engraving, double tool head lathe processing, grooving processing.
The cylinder multi-process motion control system supports three-axis three-linkage or four-axis four-linkage motion control. It can automatically switch tools during processing and precisely compensate for position offset.
The four-axis four-linkage motion control system has optional rotation axis marking (A/B/C). It can switch between the original angle and nearby rotation.
The three-axis three-linkage motion control system is used for planar relief,cutting processing and three-axis cylindrical engraving.
The two-axis two-linkage motion control system can be combined with any two axes for control: XY, XZ, YZ, etc. It can be used in band saws and wire cutting.
Leave a Message
If you are interested in our products, please leave your phone number.
Inquire Now →Contact Us
Address: 5F, Building 4, No.4 Yard, Life Science Park, Beiqing Road, Changping District, 102206 Beijing, China
WeChat Official Account
After-sales and Maintenance
©2023 Beijing RichAuto S&T Co., Ltd. Powered by：CEglobal
by telephone
Scan code consultation
WeChat official account
After sales and maintenance
